Two-strip Beech wood flooring oiled or lacquered 22mm x 129mm

Beech is a light-colored wood species which acquires a warm, reddish golden tone with age. The structural grain pattern is straight with a fine, even texture. Its excellent strength properties provide a durable wooden floor with a classic look. A hardwood timber, Beech is one of the strongest and most durable woods used for wood flooring.

Beech wooden floors are available pre-finished with the following surfaces:

Clear oil - An oiled surface treatment accentuates the glow of the wood and provides a soft, natural surface that is durable and easy to maintain.
Silkmatt lacquer - Surface treatment with a Silkmatt lacquer gives the floor a slight sheen with a strong and very durable surface. The floor is easy to clean and suitable for rooms in constant use.
Ultramatt lacquer - An Ultramatt finish is virtually invisible to the eye, offering a durable lacquered surface with the look of an oiled finish. The floor is easy to clean and care for.
Untreated - Junckers floors can be delivered untreated but must be surface treated using one of Junckers oil or lacquer products before use. This can be done on-site post installation.

​Dimensions - Junckers Beech wood flooring is available as overlay or structural floors, 14mm or 22mm thick boards both with a plank width of 129mm.

Choosing the thickness of the floorboards depends on what goes underneath. If the new floor is to be installed over an existing, level subfloor, an overlay floor of thinner boards is required. If the new floor is to be installed on flooring battens you will need a structural, thicker floorboard. Once installed, your new floor should be the right height for door moldings, doorsteps and match the height of other floors in the house.