Opticore - Flat roofing fasteners
by EJOT UK Ltd
Opticore LS 5.5
Applications
- Membrane faced insulated sandwich panels to light steel sections
Properties
- Carbon Steel with organic corrosion resistant finish
- Assembled Opticore self-coring integral Nylon head
Technical specifications
- Opticore drive bar required (TORX 30Plus)
- Steel sections from 1.2 to 3.0mm in thickness
Opticore SF 6.3
Applications
- Side lap stitcher for Membrane faced insulated sandwich panel
Properties
- Carbon Steel with organic corrosion resistant finish
- Assembled Opticore self-coring integral Nylon head
Technical specifications
- Opticore drive bar required (Torx 30Plus)
- Lap stitcher
Opticore TS 6.3
Applications
- Membrane faced insulated sandwich panels to timber sections
Properties
- Carbon Steel with organic corrosion resistant finish
- Assembled Opticore self-coring integral Nylon head
Technical specifications
- Opticore drive bar required (11mm external)
- 40mm minimum embedment into timber
Opticore HS 5.5
Applications
- Membrane faced insulated sandwich panels to hot rolled steel sections
Properties
- Carbon Steel with organic corrosion resistant finish
- Assembled Opticore self-coring integral Nylon head
Technical specifications
- Opticore drive bar required (11mm external)
- Steel sections from 4.0 to 12.0mm in thickness
Opticore JT3 2 6.3
Applications
- Side lap stitcher for Membrane faced insulated sandwich panel
Properties
- A2 Austenitic Stainless Steel fastener with Carbon steel drill point
- Assembled Opticore self-coring integral Nylon head
Technical specifications
- Opticore drive bar required (Torx 30Plus)
- Lap stitcher
Opticore JT3 2 6.5
Applications
- Membrane faced insulated sandwich panels to timber sections
Properties
- A2 Austenitic Stainless Steel fastener with Carbon steel drill point
- Assembled Opticore self-coring integral Nylon head
Technical specifications
- Opticore drive bar required (11mm external)
- 40mm minimum embedment into timber
Opticore JT3 3 5.5
Applications
- Membrane faced insulated sandwich panels to light steel sections
Properties
- A2 Austenitic Stainless Steel fastener with Carbon steel drill point
- Assembled Opticore self-coring integral Nylon head
Technical specifications
- Opticore drive bar required (TORX 30Plus)
- Steel sections from 1.2 to 3.0mm in thickness
Opticore JT3 12 5.5
Applications
- Membrane faced insulated sandwich panels to hot rolled steel sections
Properties
- A2 Austenitic Stainless Steel fastener with Carbon steel drill point
- Assembled Opticore self-coring integral Nylon head
Technical specifications
- Opticore drive bar required (11mm external)
- Steel sections from 4.0 to 12.0mm in thickness
Specification Details for Opticore - Flat roofing fasteners (Screws)
Please note that these product properties are not a replacement for the manufacturer's literature and it is always recommended that EJOT UK Ltd is consulted before specifying.
Commercial
|
||
| Product ID Number (?) | LS 5.5 | |
| Quantity Per Pack (?) | 100 | |
| Typical Building Sector (?) | Commercial , Domestic , Healthcare , Industrial | |
Other
|
||
| Additional Notes (?) | Opticore drive bar required (TORX 30Plus) | |
Size & Weight
Certifications & Ratings
Technical
Materials & Finishes
Looking for specific information on the sustainability credentials of this product?
File Downloads for Opticore - Flat roofing fasteners
Contact
Contact
Contact
