Hush HD1010 Batten Soundproof Ceiling and Floor System

The Hush HD1010 is a soundproof ceiling and floor system that offers sound control and insulation between separating concrete floors. Fully tested and compliant with all UK Building Regulations - Approved Document E (England & Wales), Section 5 (Scotland) and Part G (Northern Ireland) - this acoustic system represents an economical solution where the building's separating floors are formed from concrete.

It is suitable for use in projects based on concrete structures less than 300 kgs / m² down to as low as 235kgs/m² mass per unit area.

The HD1010 system is constructed in the following way:

• Hush Battens loose laid at required centres over a layer of Hush Felt 10 Resilient Layer
• 18mm tongued and grooved flooring grade chipboard or plywood is then glued to the Hush Battens using Hush Bond and sealed to all perimeters using Hush Seal 20
• Timber battens are fixed to the underside of the concrete at required centres.
• One layer of 12.5mm Gyproc Soundbloc or Fireline plasterboard is secured to the timber battens.
• All perimeters are sealed prior to skimming.

Acoustic Performance

Impact (L’nT,w) - 56 dB

Airborne (DnT,w) - 56 dB

Airborne (DnT,w + Ctr) - 47 dB