Aluthermo RoofReflex

RoofReflex is a hybrid roof and wall breather membrane combined with an insulation layer and CE approved to EN-13859It offers superb performance and provides a unique set of key product characteristics which include roof and wall dual application approval, excellent soundproofing properties, up to 1.47 additional r-value and a low emissivity surface.There are also lower installed costs than PIR when installed in combination with mineral/glasswool. The insulation is manufactured using hydrophobic and self-extinguishing polyester fibre and is created out of Recycled Material. The combined product has an E-fire rating.RoofReflex is highly moisture vapour open but still remains 100% air-tight. This design concept helps to keep the heat in while allowing unwanted moisture to leave the building, which saves money and creates a healthy internal living environment. By combining RoofReflex with a suitable Vapour Control Layer (such as VC2 or VC8 Reflective for example), the internal structure of the Walls and roofs is protected from condensation damage, and the U-value of the insulation maintained at an optimum level. RoofReflex also has integrated Sealing Tapes to quickly and easily maintain the air-tight seal at all joints.RoofReflex edges can be left unsealed . The membrane is LABC and EPC approved, and does not need to be reversed in unventilated cavity applications. RoofReflex is also orientated to provide a cooling effect in summer, lowering air-conditioning costs, and keeping the building cooler.Aluthermo RoofReflex can be found on NBS Create and NBS Plus software packages. Full information can be found for NBS specification with the table below. The links will open a pop up window with full specification information.