Flexoper - Roof Membranes
by Bitufa (UK)
Flexoper consists of a 5 mm thick homogeneous membrane, the underside is provided with a vapour pressure release sheet made of perforated glassfleece. The membrane is installed using the torch on method. The cleverly designed pattern on the underside allows the membrane to bond only 15 % of its area; sufficient for a good and correct adhesion to the roof deck. The major advantage is that the remaining 85 % allows for compensation of any vapour pressure; this precludes blistering.
With Flexoper you install a waterproof layer and a vapour pressure release sheet in one operation. That considerably increases the lifetime of your construction areas and decreases the labour time required and therefore cuts costs.
Specification Details for Flexoper - Roof Membranes (Liquid Applied Systems)
Please note that these product properties are not a replacement for the manufacturer's literature and it is always recommended that Bitufa (UK) is consulted before specifying.
Size & Weight
|
||
| Thickness (?) | 5 mm | |
Other
|
||
| Uniclass (?) | Pr_25_93_72 Roofing and cladding units | |
File Downloads for Flexoper - Roof Membranes
Contact
Contact
Contact
