Soltherm Endurance P+ Silicone EWI System
by Soltherm External Insulations Ltd
Soltherm Endurance P+ Silicone EWI system is an ETA approved external wall insulation system incorporating Grey Expanded Polystyrene (Grey EPS) insulation with a silicone render finish, designed to increase a building's thermal efficiency & weather resistance.
Soltherm Endurance P+ Silicone EWI system features a specialized cement-free base coat with a double layer of Reinforced Soltherm Mesh & Standard Soltherm Mesh, which subsequently improves the impact resistance vs. conventional EPS systems (hard body impacts up to 138 joules).
Soltherm Endurance P+ Silicone EWI system has an effective life in excess of 25 years and is suitable for use on both new build & refurbishment projects, but is restricted for use below 18m (England & Wales) or 11m (Scotland) in accordance with National Building Regulations.
Key Features:
- Superior impact resistances vs. conventional EWI systems (hard body impacts up to 138 joules)
- Lightweight insulation material
- Good workability easy to cut and handle
- Mechanically & adhesively fixed
- Low water absorption
- High vapour permeability
- Double Mesh (HD) system
- ETA Approved
Specification Details for Soltherm Endurance P+ Silicone EWI System (Insulation Systems)
Please note that these product properties are not a replacement for the manufacturer's literature and it is always recommended that Soltherm External Insulations Ltd is consulted before specifying.
Materials & Finishes
|
||
| Colour (?) | Grey | |
| Finish(es) (?) | Silicone Render , Textured | |
| Material (?) | EPS , Expanded Polystyrene | |
Certifications & Ratings
Technical
|
||
| Features (?) | Adhesively Fixed , Double Mesh , High Vapour Permeability , Low Water Absorption , Mechanically Fixed | |
| Impact Resistance (Code) (?) | Category I | |
| Thermal Conductivity (?) | 0.032 W/mK | 69.51% |
Commercial
|
||
| Typical Use (?) | EWI , External Cladding , External Wall Insulation , Facades , Low Rise , Medium Rise , New Build , Refurbishment , Render | |
Physical Properties
|
||
| Impact resistance (J) (?) | 138 J | |
File Downloads for Soltherm Endurance P+ Silicone EWI System
Contact
Contact
Contact
