weberfloor smooth rapid 4160 (Rapid drying, self-smoothing flooring compound) — Flooring System

weberfloor smooth rapid 4160 is a pump or hand applied, rapid drying, smoothing compound for floors, with Low Dust TechnologyTM, which gives a strong surface layer for early floor covering. The product is formulated from special cements, aggregates and chemical admixtures.

weberfloor smooth rapid 4160 is designed for use in residential and commercial areas. Rapid drying technology allows our quickest overlay compared to traditional sand/cement, concrete or anhydrite screeds. It provides a smooth and strong finish ideal for receiving a range of final floor coverings.

Features and benefits

• For application depths between 2-30mm
• Weber Low Dust TechnologyTM improves comfort of applicators
• Pump or hand applied
• Rapid drying
• Foot traffic after 1-3 hours
• Final floor covering installed in as little as 6 hours
• Excellent spreading and smoothing characteristics
• Low alkalinity
• Casein-free
• Low emissions

For levelling solid bonded substrates

• Concrete
• Sand/cement screeds
• Anhydrite screeds
• Can also be used as a levelling compound for any of our weberfloor base or renovation screeds

Suitable for covering with:

• Vinyl/Linoleum
• Carpet
• Laminate flooring
• Parquet flooring*
• Tiles

*May require extended time before covering

Constraints

• Not to be left without a suitable floor covering
• Not to be used where some movement is expected (eg. underfloor heating)

For these substrates the floor should be levelled with weberfloor fibre 4310 or weberfloor 4320. Please see relevant datasheets for more details.