Firesafe Industry System
by Contar Resins
Contar Firesafe Industry is an MMA resin based concrete repair and surfacing material that complies with the London Underground section 12 regulations and BS476 parts 7. Contar Firesafe Industry is an ideal material for patching damaged concrete surfaces and with proper preparation, is capable of filling large cracks and depressions in severely damaged concrete. Contar Firesafe Industry can be applied internally & externally to any thickness required from a minimum of 6mm up to 120mm. Contar Firesafe Industry may be used to create ramps & falls and levelling compound prior to the application of other Contar flooring systems. Contar Firesafe Industry can be laid as a surface screeding material over concrete surfaces to improve load bearing characteristics of most floors. The material is also ideal for use in areas where high resistance to chemicals is required. Contar Firesafe Industry may be used as a large crack filler material within concrete floors damaged by heavy plant or vehicular traffic. Contar Firesafe Industry is widely used in commercial & industrial warehousing, highways and by above and below ground rail services.
Features
- Ultra-fast cure time – as little as 40 minutes Minimising disruption enabling rapid refurbishment
- Easy DIY application possible Cost effective
- Exceptional strength (75kN/mm²) & durability
- Designed for heavy load bearing requirements Ultra-high strength
- Excellent resistance to chemicals & dusting Durable and ‘fit for purpose’
- Installation temperature range 0˚C to +30˚C
Specification Details for Firesafe Industry System (Floor Screeds)
Please note that these product properties are not a replacement for the manufacturer's literature and it is always recommended that Contar Resins is consulted before specifying.
Technical
|
||
| Application Temperature (?) | 0 - 30 °C | |
| Chemical Resistance (?) | Excellent | |
| Compressive Strength (?) | 75000 N/mm2 | 100% |
| Elongation at Break (?) | 0.56 % | |
| Features (?) | Easy DIY Application , Fast curing | |
| Flexural Strength (MPa) (?) | 24000 MPa | |
Other
|
||
| Uniclass (?) | Pr_35_31_06 Bedding and underlay compounds | |
Physical Properties
|
||
| Cure Time (?) | 120 Minutes | 66.67% |
| System Type (?) | Contar Firesafe Industry Powder , Contar Industry Resin , Contar Primer | |
Certifications & Ratings
|
||
| British Standards (?) | BS 476 | |
Commercial
|
||
| Typical Building Sector (?) | Industrial | |
Materials & Finishes
|
||
| Colour (?) | Grey | |
Size & Weight
|
||
| Thickness (?) | 6 mm | |
File Downloads for Firesafe Industry System
Contact
Contact
Contact
