Firesafe Industry HD System
by Contar Resins
Contar Firesafe Industry HD is a heavy duty, MMA resin based concrete repair and surfacing material that complies with the London Underground section 12 regulations and BS476 part 7. Contar Firesafe Industry HD is an ideal material for patching damaged concrete surfaces with selected aggregates and with proper preparation, is capable of filling large cracks and depressions in severely damaged concrete. Contar Firesafe Industry HD can be applied internally & externally to any thickness required from a minimum of 12.5mm up to 300mm. Contar Firesafe Industry HD may be used to create ramps & falls and levelling compound prior to the application of other Contar flooring systems. Contar Firesafe Industry HD can be laid as a surface screeding material over concrete surfaces to improve load bearing characteristics of most floors. The material is also ideal for use in areas where high resistance to chemicals is required. Contar Firesafe Industry HD may be used as a large crack filler material within concrete floors damaged by heavy plant or vehicular traffic. Contar Firesafe Industry HD is widely used in commercial & industrial warehousing, highways and by above and below ground rail services.
Features
- Ultra-fast cure time – as little as 40 minutes Minimising disruption enabling rapid refurbishment
- Easy DIY application possible Cost effective
- Exceptional strength (75kN/mm²) & durability
- Designed for heavy load bearing requirements Ultra-high strength
- Excellent resistance to chemicals & dusting Durable and ‘fit for purpose’
- Installation temperature range 0˚C to +30˚C Curing times are unaffected at temperatures down to 0˚C
Specification Details for Firesafe Industry HD System (Floor Screeds)
Please note that these product properties are not a replacement for the manufacturer's literature and it is always recommended that Contar Resins is consulted before specifying.
Technical
|
||
| Application Temperature (?) | 0 - 30 °C | |
| Chemical Resistance (?) | Excellent | |
| Compressive Strength (?) | 75000 N/mm2 | 100% |
| Elongation at Break (?) | 0.56 % | |
| Features (?) | Durability , Easy DIY Application , Exceptional Strength , Fast Curing | |
| Flexural Strength (MPa) (?) | 24000 MPa | |
| Usage Class (?) | Heavy | |
Physical Properties
|
||
| Cure Time (?) | 40 Minutes | 100% |
| System Type (?) | Bulking Aggregates , Contar Firesafe Industry HD Powder , Contar Industry Resin , Contar Primer | |
Certifications & Ratings
|
||
| British Standards (?) | BS 476 | |
Commercial
|
||
| Typical Building Sector (?) | Industrial | |
Materials & Finishes
|
||
| Colour (?) | Grey | |
Size & Weight
|
||
| Thickness (?) | 12.5 mm | |
Other
|
||
| Uniclass (?) | Pr_35_31_06 Bedding and underlay compounds | |
File Downloads for Firesafe Industry HD System
Contact
Contact
Contact
