The Aquabord Laminate product is the perfect choice for internal Walls where a stylish, hard wearing, waterproof, grout free, mould free and easy to clean finish is needed.
Available in a range of extremely popular designs, Aquabord Laminate panels can cover a large wall area in one sheet. With our range of finishing accessories you can be confident in achieving a perfect finish, so easy to fit - simply adhere onto flat, dry walls or existing tiles, light in weight thanks to its foam core, they offer a durable, low-maintenance alternative to wall tiles.
It is Class 2 Fire Rated when fixed onto a non-combustible substrate.
Use Aquabord Laminate Panels in:
• Bathrooms
• Washrooms
• Offices
• Reception Areas
• Domestic Kitchens
• Living Rooms
• Hallways
• Utility Rooms
Application
The Aquabord Laminate material is a solid waterproof foam core product that can be easily cut to size, trims are available for internal and externals corners, edges and where required a watertight base seal. It's rigid properties allow the Aquabord Laminate panels to be fixed to most clean and dry internal surfaces, however, they should not be installed near hot areas or where excess heat or exposed flame could damage or distort the panels. Stainless Steel should be used where temps exceed 60° C.
Brickwork – in good condition and even joints
Block work – in good condition and even joints
Plaster – well bonded, Smooth and flush
Plaster board – sealed with PVA primer
Concrete – good condition, smooth and flush
Plywood
Ceramic tiles (not loose and cleaned with de-greaser)
IPSL recommend our HB40 MS (modified silicon) adhesive. This product offers a superior bond, works better in moist conditions, and is quick grabbing. In all situations where there is any doubt over fixing then a small area must be tested before proceeding with installation.
HB40 MS/HG 310ml tube – typically 2 tubes per 1.2m x 2.44m panels applied in grid system over the entire sheet.
Please note that these product properties are not a replacement for the manufacturer's literature and it is always recommended that Interior Panel Systems is consulted before specifying.
|
|
||
| Brand Name (?) | Aquabord Laminate | |
| Colour Name (?) | Arctic , Midnight Galaxy | |
| Typical Use (?) | Bath panels , Cladding , Decorative wall coverings , Interior , Interior Use , Internal walls , Shower panels , Showers , Wall Cladding , Walls , Wet Hygienic areas | |
| Warranty (?) | 10 years | 66.67% |
|
|
||
| Standards (?) | ISO 9001 | |
|
|
||
| Appearance (?) | Mill Finished | |
|
|
||
| Colour (?) | Grey , White | |
| Material (?) | High Pressure Laminate with Solid Waterproof Foam Core | |
|
|
||
| Uniclass (?) | Pr_25_71_14 Cladding and lining panels | |