VR4K Access Control Modules

The VR4K series access control modules can be connected together to work with the VX2200 system functional speaker modules VR4KAM2W. As with other modules in the range the face plate is vertically brushed 12 gauge stainless steel and a range of VR4K series access control modules are available:

VR4KCLM - Coded access module including 2 codes (4 - 8 digits), 2 relay outputs with a push to exit button input for each relay. Programmable relay times (1 - 99 seconds or 00 for latching).

VR4KPAD - Wiegand coded access module for the Portal Plus access control system. It also incorporates blue back-lit key buttons. The number of codes dependent on Portal Plus controller setup.

VR4KVPM - Vprox reader module suitable for all VProx controllers: VP20, VP100, VP250, VP1000 and VP4000. It has a tri-colour status LED (amber = standby, green = access granted and red = access denied).

VR4KPPM - Wiegand proximity reader module for the Portal Plus access control system that can be connected to an EWSi 2 door controller (PPCU2) and programmed via the PROS CS software. Includes 3 status LED's (amber = data/standby, green = access granted and red = access denied) and sounder for user feedback.Can also be used on other third party systems which support the Wiegand protocol.

VR4KPROXM - Blank proximity reader ''cut out'' module (to fit standard 40mm x 40mm 3rd party panel mount reader).

VR4KEMP - Wiegand proximity reader module for the Portal Plus access control system that can be connected to an EWSi 2 door controller (PPCU2) and programmed via the PROS CS software. Includes a tri-colour halo status LED (amber = standby, green = access granted and red = access denied) and sounder for user feedback. Can also be used on other third party systems which support the Wiegand protocol.

VR4KBIO - Wiegand biometric fingerprint reader for the Portal Plus access control system that can be connected to an EWSi 2 door controller (PPCU2). Can be programmed with up to 9500 fingerprints (via PROS CS software). Includes a tri-colour halo status LED (amber = standby, green = access granted and red = access denied) and sounder for user feedback.

VR4KMI - Standalone programmable MiAccess MiFare proximity reader (unlimited user capacity, 1 relay which can be programmed from 1-255 seconds or toggle ON/OFF mode and 1 PTE input). Programmable via the PROA MS software.

Like other modules in the VR4K series range it has been designed to fit into the 4000 series range of flush and surface backboxes