Elvox Digi Bus Series - Galileo Style Entrance Panel

Range of digital dial entrance panels for use with the 'Digi bus' series of equipment. Available in modular surface or flush mounted 'Galileo' range where the required modules can be selected to create a personalised entrance panel. The panels offer a wide range of standard features using the minimum number of components. The entrance panels may be used in many different configurations from simple Single door audio systems to multiple door audio/video complexes.

All panel modules are available in light grey, 'sable' grey, and anthracite grey. Because the electronics in the Digibus entrance panels require a minimum of three modules per panel, the modules are supplied in groups of three already interconnected. A fourth module may be added, if required, to a row or column of three interconnected modules.

Additional columns or rows of auxiliary modules can be assembled into the panel by using the appropriate module holders and frames as follows.

The modules are first mounted in a module holder frame. These frames, 8D81, 8D82

8D83 and 8D84 are for one, two, three or four modules mounted vertically.

> Note: for three modules mounted side by side, it would be necessary to us three frames type 8D81.

The module holder frames complete with modules are then mounted either in a bezel without rain hood (91 series) or a frame with a rain hood (92 series).

These bezels are designed to hold one, two or three or four single modules arranged horizontally (9111, 9121, 9131 or 9141); one, two, three or four rows, each with two modules, mounted side by side (9112, 9122, 9132 or 9142) or one, two three or four rows, each with three modules mounted side by side (9113, 9123, 9133 or 9143) and finally, one, two three or four rows, each with four modules mounted side by side (9114, 9124, 9134 or 9144). The frames with rain hood use similar numbers but using 92 as the first two digits instead of 91.

A full range of surface or flush Back Boxes is available for these units (see data).

Also available are standard surface mounted Aluminium panels with a painted finish, decorative flush mounted brass effect 'Patavium' style panels and 'Vandal Resistant' surface or flush mounted range for tough environments. For the latter versions please refer to the relevant data.