4 Panel Horizontal Slider with 4mm Plate Polycarbonate Glazing
by Omega Build
SmartSlider - 4 Panel Horizontal Slider (4PHS) with 4mm Plate Polycarbonate Glazing
This product is made-to-measure based on the dimensions supplied.
4 Panel Horizontal Slider (4PHS)
(Suitable for) Window Reveal dimensions:
Width: 1,200mm (minimum), 4,000mm (maximum).
Height: 300mm (minimum), 1,800mm (maximum).
Operation:
The sliding panels slide in the base frame. The base frame has (2) channels.
In describing the channels in which the panels slide; the panels are numbered 1-4, with 1 being left-hand side panel and 4 being the right-hand side panel (viewed from inside the room).
Panel 1 Slides in the channel furthest from the existing window.
Panel 2 slides in the channel nearest the existing window.
Panel 3 slides in the channel furthest from the existing window.
Panel 4 slides in the channel nearest the existing window.
The four panels hook together when closed to provide a draught-proof seal.
Glazing:
4mm Plate Polycarbonate Glazing Panel.
Installation:
SmartSlider can be fitted directly to the face of the existing frame (Face Fixed), or
SmartSlider can be fitted to the window reveal (Reveal Fixed).
Specification Details for 4 Panel Horizontal Slider with 4mm Plate Polycarbonate Glazing
Please note that these product properties are not a replacement for the manufacturer's literature and it is always recommended that Omega Build is consulted before specifying.
Omega Build hasn't formatted technical specifications for 4 Panel Horizontal Slider with 4mm Plate Polycarbonate Glazing yet.
Please check out the similar products section for alternatives. Hint: products with have technical specifications.
File Downloads for 4 Panel Horizontal Slider with 4mm Plate Polycarbonate Glazing
Contact
Contact
Contact
