Mapeproof One Coat - Two-component, single-coat epoxy surface damp proof membrane for controlling residual, static and construction moisture in cementitious substrates
by Mapei
Two-component, single coat application, damp proof membrane for controlling residual and constructional moisture in cementitious substrates.
Mapeproof One Coat is used on cementitious floors with residual or constructional moisture levels of above 75% RH and below 97% relative humidity prior to the installation of resilient floor coverings. The product can be applied over mechanically prepared power floated concrete sub floors or over sand/cement screeds that are laid over an effective moisture barrier.
The product is easy to use and dries within 6 hours in the following temperatures:
+10°c 5-6 hours
+23°c 3-4 hours
+30°c 2-3 hours
Coverage: 16m² per 7kg unit.
Packaging: 7kg units.
Specification Details for Mapeproof One Coat - Two-component, single-coat epoxy surface damp proof membrane for controlling residual, static and construction moisture in cementitious substrates (Damp-Proof Membranes)
Please note that these product properties are not a replacement for the manufacturer's literature and it is always recommended that Mapei is consulted before specifying.
Technical
|
||
| Application Temperature (?) | 10 - 30 °C | |
| Dynamic viscosity (?) | 4500 mPas | |
| Exposure Category (?) | Building Materials & Hardware | |
| Working Temperature (?) | -20 - 80 °C | |
Materials & Finishes
|
||
| Colour (?) | Black | |
Physical Properties
Certifications & Ratings
Commercial
|
||
| Application (?) | Cement Screeds , Floated Concrete Sub Floors , Sand Screeds | |
Other
|
||
| Uniclass (?) | Pr_25_57_21 Damp-proof courses and cavity trays | |
File Downloads for Mapeproof One Coat - Two-component, single-coat epoxy surface damp proof membrane for controlling residual, static and construction moisture in cementitious substrates
Similar Damp-Proof Membranes Products
Contact
Contact
Contact
