Plastimul - Bituminous emulsion waterproofer and adhesive
by Mapei
Bituminous emulsion waterproofer and adhesive.
Use Plastimul for waterproofing horizontal and vertical surfaces on foundations, retaining walls, concrete under-linings to roofs etc.
Due to its adhesive characteristics, Plastimul can be used to bond insulating materials such as cork, rockwool, etc.
When mixed with cement and aggregate, Plastimul can be used for minor repairs to asphalt paving subject to light traffic.
Plastimul is a water emulsion of selected bitumens with a pasty consistency, that is totally solvent-free. To use as a waterproofer apply the Plastimul in several layers until the desired thickness is obtained.
After drying, Plastimul forms a flexible, waterproof layer.
Consumption
– for waterproofing: 1-4 kg/m2 depending on the type of application;
– as an adhesive for insulating panels: 2-3 kg/m2.
Packaging
- 12 kg drums.
Specification Details for Plastimul - Bituminous emulsion waterproofer and adhesive (Adhesives)
Please note that these product properties are not a replacement for the manufacturer's literature and it is always recommended that Mapei is consulted before specifying.
Technical
|
||
| Application Temperature (?) | 5 - 35 °C | |
| Dynamic viscosity (?) | 40000 mPas | |
| Exposure Category (?) | Building Materials & Hardware | |
Physical Properties
|
||
| Shelf Life (?) | 12 Months | 76.74% |
Certifications & Ratings
Commercial
Materials & Finishes
|
||
| Colour (?) | Black | |
Other
|
||
| Uniclass (?) | Pr_20_31_02 Adhesives and bonding compounds | |
File Downloads for Plastimul - Bituminous emulsion waterproofer and adhesive
Contact
Contact
Contact
