Lampocem - Ready-to-use shrinkage-free rapid setting and hardening hydraulic binder
by Mapei
Ready-to-use shrinkage-free hydraulic binder with rapid setting and hardening.
Use Lampocem for all types of rapid fixing on both vertical and horizontal concrete and masonry surfaces, for fixing corbels, pipelines, sanitary ware, hangers, and for securing timber and metal grounds.
Lampocem has a very rapid setting time (about 3 minutes at 20°C). Mixed with water Lampocem becomes a paste with a plastic-thixotropic consistency, easy to apply, even on vertical surfaces, without running and no shuttering needed.
Lampocem is a pre-blended powdered binder composed of highly resistant cements and special additives. Preparing the mix: while stirring pour 1 kg Lampocem into a container holding 200-210 grams of water, and hand mix using a trowel until a smooth, lump-free paste is obtained. The mixing-ratio by volume is 3 parts Lampocem to 1 part water. Quickly apply the Lampocem with a flat trowel.
Consumption
1.8 kg of Lampocem per litre of cavity to be filled.
Packaging
25 kg bags and boxes containing 4 bags each of 5 kg.
Specification Details for Lampocem - Ready-to-use shrinkage-free rapid setting and hardening hydraulic binder (Adhesives)
Please note that these product properties are not a replacement for the manufacturer's literature and it is always recommended that Mapei is consulted before specifying.
Physical Properties
|
||
| Product Type (?) | Fine Powder | |
| Shelf Life (?) | 12 Months | 76.74% |
| Volume Solids (?) | 100 % | |
Certifications & Ratings
Materials & Finishes
|
||
| Colour (?) | Grey | |
Technical
|
||
| Dry Bulk Density (?) | 1200 kg/m³ | |
| Exposure Category (?) | Building Materials & Hardware | |
| pH (?) | 11 pH | |
Commercial
Other
|
||
| Uniclass (?) | Pr_20_31_02 Adhesives and bonding compounds | |
File Downloads for Lampocem - Ready-to-use shrinkage-free rapid setting and hardening hydraulic binder
Contact
Contact
Contact
