Keraquick XL Fibrelite - Fibre reinforced high yield cement based rapid setting adhesive for interior and exterior use when installing porcelain, ceramic and natural stone materials

by Mapei

Fibre reinforced high yield cement based rapid setting adhesive for the interior and exterior bonding of ceramic and porcelain tiles and mosaics and natural stone materials that are not sensitive to moisture. Ideal for large format tiling. Suitable for fixing tiles up to 1500 x 1500mm.

Keraquick XL Fibrelite can be installed on to suitably prepared timber substrates such as 15mm overlaid plywood floors. It is suitable for use over wet or electrical underfloor heating systems and over prepared calcium sulphate screeds (anhydrite).   

Keraquick XL Fibrelite is a powder composed of a mixture of special cements, selectively graded aggregates, synthetic resins, fibres and setting accelerators that develop a high bond strength only 90 minutes after setting. For this reason floor installations can be completed very quickly. Floors can be walked on after only 90 minutes and are ready for general foot traffic after 12 hours. When hardened Keraquick XL Fibrelite is frost and water resistant.

Specification Details for Keraquick XL Fibrelite - Fibre reinforced high yield cement based rapid setting adhesive for interior and exterior use when installing porcelain, ceramic and natural stone materials (Adhesives)

Please note that these product properties are not a replacement for the manufacturer's literature and it is always recommended that Mapei is consulted before specifying.

Looking for specific information on the sustainability credentials of this product?

File Downloads for Keraquick XL Fibrelite - Fibre reinforced high yield cement based rapid setting adhesive for interior and exterior use when installing porcelain, ceramic and natural stone materials

Clear selection

One-Click Quote