Adesilex G19 - Two-component epoxy polyurethane adhesive

Adesilex G19 is a two-component adhesive made from an epoxy-polyurethane polymer, component A, and a special hardener, component B.

When the two components are mixed together, they form an even coloured paste which is easy to apply with a suitable notched trowel.

After setting (around 24 hours), which takes place by means of a chemical reaction without any shrinking, Adesilex G19 becomes though and resistant to moisture, water, heat and atmospheric agents, and adheres extremely well to almost all materials normally used in the building industry.

Where to use:

Extremely strong, tough, elastic, adhesive for general purpose use, particularly suitable for non-absorbent substrates or moisture-sensitive substrates (wood, metal, ceramic, stone, resin, PVC, rubber, etc.).

For use on floor in interior and exterior applications.

Specifically developed for the installation of rubber athletic tracks.

Also suitable as universal adhesive for rubber, PVC and all common resilient and textile floor covering types, especially in the event of extreme temperatures due to solar radiation, intense mechanical stress by lift truck, forklift, etc. or frequent washing (in particular when the floor coverings are not welded or sealed).

Bonding of:

• tile or sheet rubber flooring (with flat-back or canvas imprint or stalk back) for interiors and exteriors, subject to heavy and intense traffic;
• rubber flooring for athletic complexes (e.g. tracks);
• homogeneous or composition vinyl or PVC foam backed flooring;
• semi-flexible vinyl flooring;
• rubber and PVC floors over existing flooring.