The PROFAB 1000 series range of Steel lockable wall and ceiling access panels provides access into jointless Plaster / Plasterboard wall / partitions and Suspended Ceilings, where access to mechanical and electrical services is required.
COMPOSITION & MANUFACTURE
The 1.2mm thick, electro-galvanised mild Steel frame holds a flush 1.2mm thick, electro-galvanised mild steel flush faced door (MD) through a simple concealed pivot hinge device. The door is held closed with a concealed lock and opens towards the user. Doors are removable if damage occurs or during installation. Panels are powder coat finished all over, a constant 2mm gap is maintained between the door and frame.
1000/BF/BL
Frame: 1.2mm thick, electro-galvanised mild steel, incorporating a simulated dry wall edge bead profile (BF). Factory welded to specified size and finished white powder coated primer.
Door: 1.2mm thick, electro-galvanised mild steel flush faced tray finished white powder coated primer.
Locks: Concealed budget lock on the rear of the door, operated from the front face with an 8mm square drive key (included). A white, round removable cap on the door face conceals the keyhole.
1000/PF/BL
All as above option but finished all-over in white powder coated Matt RAL 9010.
Please note that these product properties are not a replacement for the manufacturer's literature and it is always recommended that Profab Access is consulted before specifying.
|
|
||
| British Standards (?) | BS 2750 | |
| Certifications (?) | Certifire | |
| Fire Rated (?) | ||
| Fire Rating (?) | 120 minutes | 100% |
| Standards (?) | EN 1026 , EN 12207 , EN 1634-1 , ISO 140-3 , ISO 9001 | |
|
|
||
| Lock Type (?) | Budget Lock | |
|
|
||
| Finish(es) (?) | Powder Coated | |
| Frame Material (?) | Mild Steel | |
|
|
||
| Uniclass (?) | Pr_65_65_23_20 Duct access panels | |