HydroBond 108-LM

Highly radon resistant, cold spray-applied, seamless rubber waterproofing membrane for the external waterproofing of basements (including covered decks) and foundation walls.

HydroBond 108-LM is very quick to apply, at up to 1000m2 per day, and is not subject to the delays normally associated with liquid membranes as it can be applied in cooler and damper conditions, and without a primer.

HydroBond 108-LM is extremely puncture resistant, with high elasticity and a 95% recovery memory. The membrane becomes fully engaged into the concrete surface to prevent water tracking and is suitable for all below ground and earth-retained structures, ranging from domestic basements to large civil engineering projects.

HydroBond 108-LM can be used together with HydroBond 403 Plus to provide a complete waterproof envelope to the structure, forming a Type A (barrier) waterproofing solution suitable for Grades 1a, 1b, 2 and 3 as defined by BS 8102:2022. Where space is tight, HydroBond 109-LM can be applied by roller, brush or small airless spray machine.

The Newton HydroBond System is supported by BDA Certificate BAB 16-031/04/A and is accepted by the NHBC as a suitable waterproofing system for Type A Waterproofing to Grades 1a, 1b, 2 and 3 - BS 8102:2022.

Key Benefits

• Cold applied fully-bonded seamless membrane
• Very elastic with no shrinkage
• No primer required
• Very quick to apply - up to 1000m2 per day
• Cost efficient - the low price of the membrane coupled with high application rates = a very low installed rate per square metre
• Solvent free, non-toxic and odourless
• Non-flammable- No VOCs
• Chemically resistant 
• Highly radon resistant