Strongcoat Primer - Primer for the Strongcoat and Griptop ranges

Strongcoat Primer is a two-pack solvent free, epoxybased primer for use with the Strongcoat and Griptop range of surface toppings.

Strongcoat Primer can be used where the RH of the substrate is greater than 75%.

Strongcoat Primer is applied by brush, roller or squeegee in one or two coats depending on the texture, porosity and evenness of the surface being primed.

Packaging
Strongcoat Primer is available in 5 kg.

Coverage
Approximately 4 m²/ kg at the specified coating thickness.
Important: This coverage figure is based on application to a smooth, dense surface. Coverage figures will vary according to the texture, porosity and evenness of the surface on which the Strongcoat Primer is being applied.

Specified Coating Thickness
Approximately 200 microns / coat.

Storage
Store at temperatures between 5°C and 30°C.

Shelf Life
Strongcoat Primer has a shelf life of approximately 24 months if stored in unopened containers and under good conditions.