Search 10+ Multiple Fuel Burners from leading Burners manufacturers including; Energy Technology & Control Ltd and

ETC6000 Oxygen Trim Option

Energy Technology & Control Ltd
The ETC6080 oxygen trim interface and software that allows an oxygen probe to be added to the ETC6000 Integrated Combustion Controller or the ETC6100 Fuel:Air Ratio. By monitoring the oxygen level in the exhaust gas flue fine adjustments can be applied to the...

3 specifiers have shown an interest in this product the last month.

ETC6000 Combustion Controller

Energy Technology & Control Ltd
ETC6000 –This controller is designed to manage modulating, dual fuel (Gas plus Oil) burners as single fuel profiles or mixed profiles. There are options of fan speed control via variable frequency drive (VFD), and oxygen trim, which further improve burner ef...

9 specifiers have shown an interest in this product the last month.

ETC6000 Actuator & Servo Motors

Energy Technology & Control Ltd
ETC offers a wide choice of dedicated servo motors ranging from 4-40Nm in size for use with the ETC6000. These servo motors accurately position air dampers and fuel valves to a resolution of 0.1º over a 90º stroke, allowing fuel:air ratio profiles to be reli...

4 specifiers have shown an interest in this product the last month.

ETC2800 Flue Gas Oxygen Analyser

Energy Technology & Control Ltd
ETC2800 – This microprocessor based Flue Gas Oxygen Analyser utilising ETC’s industry leading zirconia oxide ‘in-situ’ oxygen / temperature probe. The ETC2800 Flue Gas Oxygen Analyser offers numerous features Measures flue gas temperature and oxygen c...

6 specifiers have shown an interest in this product the last month.

Boiler & Burner Sensors

Energy Technology & Control Ltd
ETC offers a range of dedicated self-checking pressure and temperature sensors for use as part of an ETC6000 system. The ETC1021 Gas Pressure Sensor is installed between the two gas isolating valves on the gas train. Once installed the sensor can be used as p...

1 specifier has shown an interest in this product the last month.

ETC6100 Fuel Air Ratio Controller

Energy Technology & Control Ltd
ETC6100 – This Fuel Air Ratio Controller (FARC) suitable for use with a variety of burner control boxes to enhance combustion control from single point to multi element control with options for fan speed control via Variable Frequency Drive and oxygen trim w...

Country 16B Multifuel

Charnwood
OUTPUT TO ROOM:   6.4kW (range 2-8kW)            OUTPUT TO WATER: 13.2kW HEATING CAPACITY: DHW and approx. 10 radiators MATERIAL: Plate steel, cast iron, fire brick, ceramic glass FEATURES: * Cleanburn airwash technology * Converting grate for...

ETC6002 Combustion Controllers 

Energy Technology & Control Ltd
ETC6002 – This integrated combustion controller is configured to manage dual fuel burners that fully modulate on Gas and stage fire for Oil (2, 3, 4 or 5 stage) referenced to a modulating air damper. There are options of fan speed control via variable frequ...

1 specifier has shown an interest in this product the last month.

ETC6075Touch-screen Display Panel.

Energy Technology & Control Ltd
The home-screen is a graphical representation of the boiler, burner and fuel delivery system. In addition, the current operating status, the values of any installed pressure or temperature sensors and any alarm conditions are also displayed. During burner sta...

ETC6003 Combustion Controller

Energy Technology & Control Ltd
ETC6003 – This integrated controller is designed for modulating, dual Gas burners, in single or mixed profiles. There are options of fan speed control via variable frequency drive (VFD), and oxygen trim, which further improve burner efficiency. The ETC6003...
Thnking face emoji
Did you know that the most common Material(s) for products within the Multiple Fuel Burners category are brick , cast iron and ceramic?'

ETC6008 Integrated Combustion Controller

Energy Technology & Control Ltd
ETC6008 – Similar to ETC6000 but has a blending function when firing mixed fuel profiles to bias the use of one fuel rather that the other depending upon fuel availability. The blending function is controlled by a signal from external systems. Oxygen trim is...

ETC6009 Integrated Combustion Controller

Energy Technology & Control Ltd
ETC6009 – Similar to ETC6003 but has a blending function when firing mixed gas profiles to bias the use of one gas rather that the other depending upon availability. The blending function is controller by a signal from external systems and, as with ETC6008, ...

ETC6066Text Based HMI

Energy Technology & Control Ltd
This text based HMI’s is the entry level display module providing information from the ETC6000 series controllers through a variety of menus. This display has a membrane keypad for the equipment operator to be able to select items for display and to change t...

1 specifier has shown an interest in this product the last month.

Multiple Fuel Burners Building Products

Search 10+ Multiple Fuel Burners from leading Burners manufacturers including; Energy Technology & Control Ltd and