Thin-R Underfloor
by Unilin Insulation
The floor in any building is an area of considerable heat loss if it is not properly insulated. Xtratherm Thin-R XT/UF when installed within a floor structure, will significantly improve the U-value (Thermal Transmittance) of new or existing floors.
Specification Details for Thin-R Underfloor (Insulation Boards)
Please note that these product properties are not a replacement for the manufacturer's literature and it is always recommended that Unilin Insulation is consulted before specifying.
Size & Weight
Certifications & Ratings
|
||
| BBA Certificate Number (?) | 08/4613 | |
| Certifications (?) | BBA , NSAI | |
| Standards (?) | ISO 14001 , ISO 9001 , OHSAS 18001 | |
Technical
|
||
| Compressive Strength (?) | 0.14 N/mm2 | 27.69% |
| Flammability Class (?) | Class 1 | |
| Thermal Conductivity (?) | 0.022 W/mK | 75.57% |
| Water Vapour Resistance (?) | 100 MNs/g | |
Commercial
|
||
| Typical Use (?) | Ground Supported and Suspended Floors | |
Other
|
||
| Uniclass (?) | Pr_25_71_52 Mineral-based boards and sheets | |
Looking for specific information on the sustainability credentials of this product?
File Downloads for Thin-R Underfloor
Contact
Contact
Contact
