MAPETHERM XPS - Extruded polystyrene insulation panels
by Mapei
Extruded polystyrene insulation panels used in thermal insulation system, available in thicknesses of 4, 5, 6, 8 and 10 cm.
Extruded polystyrene insulating panels with no surface skin, with a rough surface to help adhesive or smoothing and levelling compound grip to the surface.
Mapetherm XPS panels must be bonded to the substrate using Mapetherm AR1 or Mapetherm AR1 GG one-component cementitious adhesive in powder form, which is then mixed with water when required (please refer to the Technical Data Sheet for technical specifications). Use Adesilex FIS13 special adhesive in water dispersion as an alternative, which must be mixed together with cement (please refer to the Technical Data Sheet for technical specifications).
The panel is bonded by spreading an even layer of adhesive over the whole surface of the panel. To help fix the Mapetherm XPS panels in place (but not as an alternative to the adhesive), anchors in a suitable length may also be used, such as Mapetherm FIX.
TECHNICAL DATA:
Composition: extruded foam polystyrene.
Colour: light blue.
Thickness available cm: 4, 5, 6, 8 and 10.
Dimensions of panel cm: 120 x 60.
Packaging: from 2.88 to 6.48 m² (according to the thickness).
Specification Details for MAPETHERM XPS - Extruded polystyrene insulation panels (Insulation Boards)
Please note that these product properties are not a replacement for the manufacturer's literature and it is always recommended that Mapei is consulted before specifying.
Size & Weight
Materials & Finishes
|
||
| Colour (?) | Blue | |
| Material (?) | Polystyrene | |
Other
|
||
| Uniclass (?) | Pr_25_71_52 Mineral-based boards and sheets | |
File Downloads for MAPETHERM XPS - Extruded polystyrene insulation panels
Contact
Contact
Contact
