Thin-R Plus Partial Fill CavityPlus
by Unilin Insulation
Xtratherm Thin-R/CWP (T&G) is the best solution when designers/regulations demand higher U-value performance in external masonry Walls. Xtratherm Thin-R Cavity Plus boards achieve these higher standards whilst maintaining a residual cavity - the most effective protection against the ever more prevalent wind driven rain. The outstanding performance of Xtratherm Cavity Plus allows these goals to be achieved without a substantial increase in the overall wall thickness.
Specification Details for Thin-R Plus Partial Fill CavityPlus (Insulation Boards)
Please note that these product properties are not a replacement for the manufacturer's literature and it is always recommended that Unilin Insulation is consulted before specifying.
Size & Weight
Certifications & Ratings
|
||
| BBA Certificate Number (?) | 08/4613 | |
| Certifications (?) | BBA | |
| Standards (?) | ISO 14001 , ISO 9001 , OHSAS 18001 | |
Technical
|
||
| Compressive Strength (?) | 0.12 N/mm2 | 12.31% |
| Flammability Class (?) | Class 1 | |
| Thermal Conductivity (?) | 0.021 W/mK | 83.21% |
| Water Vapour Resistance (?) | 100 MNs/g | |
Commercial
|
||
| Typical Use (?) | Partial Fill Cavity Walls | |
Other
|
||
| Uniclass (?) | Pr_25_71_52 Mineral-based boards and sheets | |
Looking for specific information on the sustainability credentials of this product?
File Downloads for Thin-R Plus Partial Fill CavityPlus
Contact
Contact
Contact
