Stylite Inverted Roof Insulation
by Styrene Packaging & Insulation
Stylite inverted roof Insulation Boards are manufactured from high density Expanded Polystyrene (EPS) with low water absorption properties and excellent thermal conductivity values. The shiplap edges prevent air gaps between boards and in conjunction with the Stylite Filter Membrane (water-reducing layer) minimise the flow of cold rainwater below the insulation and the cooling effect on the deck.
As a result the Stylite Inverted Roof Insulation system can lengthen the life of a roof, contribute to sustainability of the building and provide long-term maintenance cost savings.
Benefits:
Kiwa BDA Agr ment Certified
Conforms to ETAG 031
Suitable for Flat Roofs and slopes between 1:80 and 1:6
Declared thermal conductivity of 0.032W/mK
High compressive strength
Lightweight, quick and easy to install
Available in increments of 1mm from 50mm to 250mm
Protects waterproofing membrane
Achieves BRE Green Guide A+
100% recyclable
No HFC s, CFC s or HCFC s
Specification Details for Stylite Inverted Roof Insulation (Insulation Boards)
Please note that these product properties are not a replacement for the manufacturer's literature and it is always recommended that Styrene Packaging & Insulation is consulted before specifying.
Technical
|
||
| Bending Strength (?) | 0.45 MPA | 100.00% |
| Compressive Stress at 10% Deformation (?) | 300 Kpa | 85.19% |
| Thermal Conductivity (?) | 0.032 W/mK | 51.15% |
Other
|
||
| Uniclass (?) | Pr_25_71_52 Mineral-based boards and sheets | |
Certifications & Ratings
|
||
| Certifications (?) | ETAG | |
Commercial
|
||
| Typical Building Sector (?) | Commercial , Domestic | |
Size & Weight
|
||
| Density (?) | 40 Kg/m3 | |
File Downloads for Stylite Inverted Roof Insulation
Contact
Contact
Contact
