Reno Dry & Reno Dry 2R

RENO DRY is a clear siloxane silicone resin to waterproof buildings that are in good condition but suffer from
penetrating damp.
RENO DRY 2R is a heavy duty water repellent clear sealer, a further advancement on RENO DRY with 2 extra weatherproof
resins added. Ideal for older buildings, where a stabilised bonded and sealed breathable surface is required.
Suitable to be used on Stone, masonry, brick, mortar and concrete.
RENO DRY 2R has all the advantages of RENO DRY, plus some more important features:
All surfaces must be clean, free of any surface coating and dry before application.
Application shall be by low pressure spray, brush or roller applying sufficient material to allow a run down of 150mm
to 300mm depending on the density of the surface. Over-spray or splashing on other exterior oil or water based
Paints is harmless and can be left without damage. RENO DRY or RENO DRY 2R can be applied at any temperature, dries
within hours and becomes fully effective within 24 hours.
Application should be made at the rate of 1 to 2 metres per litre depending upon porosity.
Dense masonry may not accept RENO DRY or RENO DRY 2R at this rate. Such surfaces should be given two coats and the
coverage extended to 1.5 to 2 metres per litre. At least 2-4 hours should be allowed between coats.
Conforms to British Standard BS6477 (1984) - Water Repellents for Masonry Surfaces.
Supplied in 20ltr resealable UN containers.
Example of the waterproofing qualities of RENO DRY 2R on brick
For application on brick or stonework.
Protective clothing, gloves or goggles and protective mask must be worn.
Reduces spalling or flaking masonry.
Reinforces and hold deteriorating stucco that cannot be sandblasted or otherwise cleaned.
Ideal for sandblasted stone and brick that has become porous and flaky.
Excellent for new concrete to give a long lasting weatherproof transparent surface.
Has a low surface tension, making it very invasive so enabling it to penetrate well into the surface up to a
depth of 1.5mm to 3mm.

Acid and alkaline resistant and is unaffected by salt spray.
Eliminates spots, stains and streaks due to moisture penetration of soot, grime or weather conditions.
Does not change the breathing characteristics (circulation of air through the wall).