Air Transfer Grilles

by Pyroplex

Application: Fire doors Fire Resistance Period: Up to 60 minutes Insulation/integrity: Integrity Test Standard: BS 476: Part 22 Approval Type: IFC Certificate No. IFCC1001
Pyroplex Limited offers a comprehensive range of Fire Rated Air Transfer Grille Systems that are suitable for use in fire resisting Doorsets for up to 60 minutes fire resistance.
In normal use, the Pyroplex system allows air to be circulated and moved throughout the building. During a fire the system is designed to close and provide a fire barrier to restrict the passage of hot gases.
Pyroplex Fire Rated Air Transfer Grille Systems are tested for 30 and 60 minutes fire resistance. Test Reports No.146520/146521 and 148053 apply combined within Assessment Report No.149511.
Grilles
Faceplates
Pyroplex Fire Rated Air Transfer Grille Systems have been specifically designed for use in the following applications:
*Calculation is based upon overall grille dimensions and distance between product veins.
The installer must ensure that the doorset/door blank has been tested with an aperture to accept an air transfer grille system for the required period of fire resistance.
Installation procedure
1. Cut the aperture in the door [The system shall be installed no closer than 150mm to the threshold and no higher than 1850mm]. 2. Line the aperture with a 6mm hardwood liner. 3. Apply a bead of Pyroplex Intumescent Acrylic Sealant centrally and spread the acrylic across the full width of Timber liner, to achieve a thickness of 0.5mm. 4. Install the Pyroplex Fire Rated Air Transfer Grille into the aperture. 5. Secure the system into place using Steel pins [not supplied]. Alternatively, secure the system using self-tapping Screws. 6. Fit the cover plates on both faces of the door and secure with screws provided.
Independently tested by Warringtonfire for 30 and 60 minutes fire resistance. The system has been tested for positive and negative pressure planes, satisfying integrity performance for 30 and 60 minutes. Test Report No.146520/146521 and 148053 apply combined within Assessment Report No.149511. IFCC1001 accreditation applies.
Providing the product is installed in accordance with the requirements of the guidance document the product is guaranteed for a period of 10 years.
Fire Rated Air Transfer Grilles
IFC Certificate IFCC1001

Specification Details for Air Transfer Grilles (Secondary Shutters & Grilles)

Please note that these product properties are not a replacement for the manufacturer's literature and it is always recommended that Pyroplex is consulted before specifying.

Looking for specific information on the sustainability credentials of this product?