Tecgrip H

High strength anchor grout for securing fixings in horizontal holes with bolt to hole diametric difference up to 25mm.
Polyester grout for anchoring steel bolts and bolts, brick ties or other fixings into concrete, stonework, brickwork, masonry and other soild substrates. Holes angled below horizontal to 45 above horizontal. Bolt to hole diametric difference up to 25mm.
The material forms a high strength anchor resistant to corrosion which may be loaded quickly after installation. Placed anchors are resistant to vibration, do not exert expansive forces and may be designed for under water installation.
The mixed grout is used for upward facing holes where the hole diameter is up to 25mm greater than the bolt or bar diameter.
Uses include; stress anchor plates, overhead rail tracks, starter bars/dowels and high impact load situations.