Highway FSC6
by Parex
A single pack pre-mixed Portland cement based non-shrink concrete suitable for thick section placing where rapid early strength gain is required. It can be used for the support of road ironwork and highway furniture, barriers and stanchion posts. The mixed concrete, when placed, will harden in approximately 10 minutes. Compressive strength will reach 20N/mm2 within two hours allowing early opening of roads to vehicular traffic. The rapid setting assists the re-bedding of road ironwork and the setting in of new systems. The product is chloride free and can be safely used with cast iron and steel units. The concrete can be placed in sections of 20mm to 200mm in thickness for standard grade or 10 to 100mm for fine grade. Greater thicknesses can be built up in layers.
Specification Details for Highway FSC6 (Miscellaneous)
Please note that these product properties are not a replacement for the manufacturer's literature and it is always recommended that Parex is consulted before specifying.
Commercial
|
||
| Typical Use (?) | Vehicular traffic | |
Technical
|
||
| Compressive Strength (?) | 20 N/mm2 | |
Materials & Finishes
|
||
| Material (?) | Portland cement based | |
Looking for specific information on the sustainability credentials of this product?
File Downloads for Highway FSC6
Similar Miscellaneous Products
Contact
Contact
Contact
