Kent Hinged Multi Vent Grille
by Kent Stainless
The Kent Hinged Multi Vent Grille KHMVG-1200/1200 is a heavy duty heelproof grille which comes with angle frame. The grille comes with Kent lift assist
Mechanical struts as standard. They are used in areas where access is required on a regular basis or where an operator may arrive onsite on their own.
They are often used to cover a staircase or over areas that may need equipment craned down into chambers below ground.
They are manufactured from Grade 304L or Grade 316L Stainless Steel as standard but material can be changed to Mild Steel Galvanised if required.
They are typically supplied with 5mm thick bars. They feature laser cut lettering which usually identifies the utility beneath or shows the project logo.
These grilles have load bearing bars which are stepped down 2mm-5mm below the surface of the transverse bars for aesthetic reasons.
Specification Details for Kent Hinged Multi Vent Grille (Miscellaneous)
Please note that these product properties are not a replacement for the manufacturer's literature and it is always recommended that Kent Stainless is consulted before specifying.
Kent Stainless hasn't formatted technical specifications for Kent Hinged Multi Vent Grille yet. However, you can download 1 specifications file in the section below.
Please check out the similar products section for alternatives. Hint: products with have technical specifications.
File Downloads for Kent Hinged Multi Vent Grille
Similar Miscellaneous Products
Contact
Contact
Contact
