Mulseal DP Single part bitumen latex emulsion is applied by brush or squeegee. The incorporation of rubber latex imparts elasticity to the dried coating. Mulseal DP is suitable for use on most building materials such as concrete, brickwork, metals and Stone. It is easily applied and may be used on damp surfaces, provided that no free water is present. It can also be applied to “green” concrete immediately after the shuttering has been struck. Where it is used as a sandwich membrane in floors, Mulseal DP should have continuity with the damp courses.
- Excellent adhesion to most common building materials
- Low water vapour permeability
- Can be applied to “green” concrete
- Resistant to sulphates and ground salts
- Dries to a flexible film
- Simple to apply by brush.
Please note that these product properties are not a replacement for the manufacturer's literature and it is always recommended that Fosroc International Ltd is consulted before specifying.
|
|
||
| Uniclass (?) | Pr_25_57_65 Plastics membranes | |