Superglass Superwall 32 Cavity Wall Batt - Glass Mineral Wool Insulation

by Etex UK Insulation Ltd

Superglass Superwall 32 is a British Board of Agrément (BBA) approved, non-combustible glass mineral wool insulation cavity wall batt, manufactured with a water-repellent additive to resist moisture ingress. The flexible batt is supplied at 455mm wide to allow friction fitting between standard vertical wall tie spacings, reducing the need for on-site cutting and waste.

Application:

Superglass Superwall 32 is designed to provide thermal insulation in full or partial fill in new external masonry cavity walls, up to 25 metres in height for full fill and without restriction for partial fill in buildings of a domestic and non-domestic nature. Additional requirements apply for buildings above 12 metres in height for full fill and above 25 metres in height for partial fill, please refer to the product BBA certificate

for more information.

Superwall 32 is BBA approved for use in all UK exposure zones (subject to conditions detailed in the BBA Certificate).

Thermal Conductivity:

Declared thermal conductivity (lambda (λ) value) of 0.032W/mK.

Fire Classification:

Deemed non-combustible with a fire classification of Euroclass A1 (the highest possible rating) when tested to EN 13501-1:2018 Reaction to Fire.

CCPI (Code for Construction Product Information)

Holds a CCPI Verification Mark. Certificate number: 005800103/1026.

Vapour Resistivity:

The product has a nominal vapour resistivity of 5 MN·s/g·m.

Environmental credentials:

  • Manufactured in accordance with ISO 14001:2015 - Environmental Management Systems (EMS). Certificate number: EMS 646508.
  • Contains no ozone-depleting substances or greenhouse gases. For more information, please refer to the Environmental Product Declaration (EPD).
  • Made from up to 84% recycled glass.
  • Generic BRE Green Guide Rating of A+.


Standards and Approvals:

  • BS EN 13162:2012+A1:2015 Thermal insulation products for buildings - Factory made mineral wool (MW) products.
  • BS EN 13172: 2012 Thermal insulation products – Evaluation of conformity.
  • ISO 9001:2015 - Quality Management Systems (QMS). Certificate number: FM 02264.


Certification:

  • UKCA certified to BS EN 13162:2012+A1:2015. Certificate number: 0086 CPR 469699.
  • CE marked to EN 13162:2012+A1:2015. Certificate number: 0751-CPR-399.0-01.
  • BBA certified for full and partial fill applications. Certificate number: 89/2231.


EUCEB (European Certification Board of Mineral Wool Products)

All Superglass glass mineral wool products are made of non-classified fibres and are certified by EUCEB. EUCEB is a voluntary initiative by the mineral wool industry. It is an independent certification authority that guarantees that products are made of fibres which comply with the exoneration criteria for carcinogenicity (Note Q) of the Regulation (EC) 1272/2008. Certificate number: BEUC-511-27949-491-14462.

Specification Details for Superglass Superwall 32 Cavity Wall Batt - Glass Mineral Wool Insulation (Insulation Batts)

Please note that these product properties are not a replacement for the manufacturer's literature and it is always recommended that Etex UK Insulation Ltd is consulted before specifying.

 This product has  1 EPD files in the document section below.

File Downloads for Superglass Superwall 32 Cavity Wall Batt - Glass Mineral Wool Insulation

Clear selection

Latest news & updates for Superglass Superwall 32 Cavity Wall Batt - Glass Mineral Wool Insulation

Announcement
Great news! We have updated our U-Value Calculator!
Announcement
Superglass, one of the UK’s leading manufacturers of glass m...

One-Click Quote