Want personalised Insulation Batts recommendations, direct from manufacturers?
x
Next
Next
Next

👏 Thanks

We’ve received your request and we’ll be in touch shortly (by email) with your product recommendations.

Search 20+ Insulation Batts from leading Thermal Insulation manufacturers including; Rockwool, DACATIE and Rockshell.

You can see a full list of manufacturers of Insulation Batts here.

Other popular types of Thermal Insulation include; Insulation Boards, Insulation Slabs and Insulation Systems.

Important criteria to consider when specifying Insulation Batts include; CE Marking, Certifications and Width.

Ablative Coated Batt

Rockwool
ROCKWOOL Ablative Coated Batt is a firestopping solution for large voids in walls and floors created by service pipes, ductwork and cables. It is easy to fit and provides excellent firestopping and acoustic performance. Each ROCKWOOL Ablative Coated Batt is cu...

Cavity - Insulation Batts

Rockwool
ROCKWOOL® Cavity is a semi-rigid full fill insulation solution for masonry cavity wall construction, suitable for use in new builds or extensions. It is easy to handle and install and provides a close fit against brick and blockwork. The product consists of a...

Rollbatt - Insulation Batts

Rockwool
ROCKWOOL® Roll, Twin Roll and Rollbatt products provide effective, medium density thermal insulation with acoustic properties. The products are suitable for roof spaces in all types of building or to overlay ceiling tiles in suspended ceilings. ROCKWOOL® Rol...

Stopseal 50mm Batt

FSi Limited
Stopseal Batt is a coated stone wool board used to reinstate the fire resistance performance of flexible & rigid wall and rigid floor constructions where apertures are penetrated by single or multiple services. The Stopseal Batt is tested with a variety of...

Dacasock Multisock

DACATIE
A DACATIE MULTISOCK consists of a 1200mm length of semi rigid ECOSE™ mineral wool slab 200mm and 300mm (standard widths). 225mm to 450mm widths are available to order. This is fully encapsulated in a recycled polythene printed sleeve with current regulations...

TyvaQuilt - Insulation Batts

Ecohome-Insulation
The TyvaQuilt .18 or Better Roofing System - Receive 3 Products in one complete kit to meet U-Value of .18 for under £21 a square Metre. Installed easier, in less Space and at less cost and labour time than fitting Kingspan or Cellotex. It has never been e...

ROCKWOOL Thermal Cavity Batts

Rockshell
ROCKWOOL Thermal Cavity Batts are a semi-rigid full fill insulation solution for masonry cavity wall construction, suitable for use in extensions. It is easy to handle and install and provides a close fit against brick and blockwork. The batts are non-combusti...

FIREPRO® SoftSeal Linear Joint Seal

Rockwool
As part of the comprehensive FIREPRO® range of fire protection products, ROCKWOOL FirePro® SoftSeal System incorporates a product specifically designed to form a linear joint seal within buildings, where the design needs to accommodate movement in the joint....

ROCKWOOL Thermal Insulation Cavity Batt

Rockwool
ROCKWOOL Thermal Cavity Batts are a semi-rigid full fill insulation solution for masonry cavity wall construction, suitable for use in extensions. It is easy to handle and install and provides a close fit against brick and blockwork. The batts are non-combusti...

Hemp Insulation

Ecological Building Systems
Thermo-Hemp is a natural insulation material manufactured from hemp by Hock in Bavaria, Germany. Hemp grows up to a height of nearly 4 metres within a period of 100-120 days. Because the plants shade the soil, no chemical protection or toxic additives are req...
Thnking face emoji
Did you know that the Width for products within the Insulation Batts category, can range from 65 mm to 1140 mm and the average is 313 mm?

URSA Party Wall Thermal Bypass Solutions

URSA UK Ltd
A number of URSA products can be used in masonry and timber framed walls to prevent party wall thermal bypass. URSA Timber Frame Roll and URSA Acoustic Roll are lightweight, unfaced glass wool rolls. Manufactured to BS EN 13162. URSA Cavity Batt is a semi-...

Reflect 140

Cygnum Timber Frame Ltd
Our Reflect® range of closed panels are factory insulated and closed on the inner face with an airtight membrane and service battens. The combination of foil surfaces and rigid PIR insulation are used to optimise performance and minimise cost. The factor...

Intubatt - Insulation Batts

Firetherm Intumescent and Insulation Supplies Ltd
Intubatt is a factory finished, unique multi-layered, low resin bonded, rock mineral fibre board. Firetherm ablative coated on both faces with our unique Optifire-identifiable coating. Manufactured under controlled factory conditions to ISO 9001 to the require...

URSA Cavity Batt

URSA UK Ltd
URSA Cavity Batt is a semi-rigid glass wool slab treated with a water repellent additive. Manufactured to BS EN 13162 and BBA 09/4624. Application URSA Cavity Batt is for use in both fully and partially filled masonry cavity walls....

Wood Fibre Insulation

Ecological Building Systems
Applications: - Timber frame, post and beam interior and exterior wall structures - Between rafter insulation - Ceiling insulation - Partitions/ drywall structures Advantages: - Inherent elasticity makes it extremely adaptable - Provides ex...

Pavaflex - Insulation Batts

Natural Building Technologies Ltd
Flexible Woodfibre Insulation Batts Application Roof: between rafter Wall: between studs Floor: between joists Finishes Subject to application Fixed Subject to application...

STEICOflex

Steico UK Ltd
The standard board size for STEICO flex is designed so that the batt will be a friction fit between 38mm wide timber  studs spaced at 600 mm increments. A 375mm wide batt is also available to fit between studs spaced at 400mm centres. The maximum s...