KWS Wall/Post Mounted Gate Catch
by D & E Architectural Hardware
KWS Door holder
Door holder for gates up to 100 kg.
For screwing on the wall of malleable Cast Iron holding bracket of Steel.
Operation
The gate is hold automatically by pushing it onto the holder. A gentle push on the hook releases the gate again.
Mounting
The gate holder is screwed on the wall at the desired holding point which should be the greatest possible distance from the door hinge. At the corresponding point the holding bracket is fastened on the gate with a 4 mm height distance to the stop plate of the holder in such a way that the screw holes are below the catch hole. When arresting the gate the holding bracket also serves as a stop plate in this way.
Specification Details for KWS Wall/Post Mounted Gate Catch (Door Furniture)
Please note that these product properties are not a replacement for the manufacturer's literature and it is always recommended that D & E Architectural Hardware is consulted before specifying.
Size & Weight
|
||
| Height (?) | 4 mm | |
Other
|
||
| Uniclass (?) | Pr_30_36 Hardware products | |
Technical
|
||
| Operation (?) | Automatic | |
File Downloads for KWS Wall/Post Mounted Gate Catch
Contact
Contact
Contact
