KWS Universal Floor/Wall Mounted Gate Catch
by D & E Architectural Hardware
KWS Door holder
Door holder for gates up to 100 kg.
For screwing on the floor of steel or Stainless Steel.
Operation
The gate is held automatically by pushing it onto the holder. A gentle push on the hook releases the gate again.
Mounting
The gate holder is screwed on the floor using plugs at the desired arresting point which should be the greatest possible distance from the door hinge. At the corresponding position the holding bracket with fastened on the gate with three Screws. By unscrewing the centre and repositioning the hook the holder can be converted from floor to wall mounting.
You can use the K1311 as K1312 all you have to do is unscrew the grub screw with an allen key where the hook is located, position the hook so it's in the same position as the K1312 is & tighten the grub screw back up.
Specification Details for KWS Universal Floor/Wall Mounted Gate Catch (Door Furniture)
Please note that these product properties are not a replacement for the manufacturer's literature and it is always recommended that D & E Architectural Hardware is consulted before specifying.
Technical
|
||
| Operation (?) | Automatic | |
Other
|
||
| Uniclass (?) | Pr_30_36 Hardware products | |
File Downloads for KWS Universal Floor/Wall Mounted Gate Catch
Contact
Contact
Contact
