KWS Wall Mounted Gate Catch
by D & E Architectural Hardware
KWS Door holders:
K1302 110mm – for gates up to 80kg
K1304 125mm – for gates up to 100kg
K1306 135mm – for gates up to 150kg
Door holder with anchor bolt for casting-in in the wall.
Of malleable Cast Iron.
Holding bracket of Steel.
Operation
The gate is held automatically by pushing it onto the holder. A gentle push on the hook releases the gate again.
Mounting
The gate holder is inserted into the wall at the desired arresting point which should be the greatest possible distance from the door hinge. At the corresponding point the holding bracket is fastened on the gate with a 4 mm height distance to the stop plate of the holder in such a way that the screw holes are below the catch hole. When arresting the gate the holding bracket also serves as a stop plate in this way.
Specification Details for KWS Wall Mounted Gate Catch (Door Furniture)
Please note that these product properties are not a replacement for the manufacturer's literature and it is always recommended that D & E Architectural Hardware is consulted before specifying.
Size & Weight
|
||
| Height (?) | 4 mm | |
Other
|
||
| Uniclass (?) | Pr_30_36 Hardware products | |
Technical
|
||
| Operation (?) | Automatic | |
File Downloads for KWS Wall Mounted Gate Catch
Contact
Contact
Contact
