Cordek

Cordek - through innovative thinking, engineering expertise, and CAD/CAM capabilities Cordek are able to solve a wide variety of engineering problems, providing technical solutions for a range of construction requirements.

Find us at:

Cordek
Cordek Ltd, Spring Copse Business Park, Slinfold
West Sussex
UK
RH13 0SZ

Cordek products

Correx is a tough, durable and impact resistant protection board, available in a range of different options to suit specific project requirements. The twin-walled polypropylene construction of the Correx boards makes them suitable for both internal and externa...
Correx - Composite Panels Cordek
Cellcore HX B is designed for use beneath reinforced concrete ground beams and pile caps to protect against the potential effects of ground heave. The product consists of a cellular construction of Filcor EPS (Expanded Polystyrene) which has been designed, mou...
Cellcore HX B Cordek
Cellcore HX S is designed for use beneath reinforced concrete floor slabs to protect against the potential effects of ground heave. The product consists of a cellular construction of Filcor EPS (Expanded Polystyrene) which has been designed, moulded and tested...
Cellcore HX S Cordek
Claymaster Pile Collars are compressible low density Expanded Polystyrene (EPS) products, used when foundations need to be protected against ground heave. As an integral part of the Cordek Cellcore ground heave system, they aid installation by fitting securely...
Claymaster Pile Collars Cordek
Cellform HX combines the benefits of Cellcore HX B with an economical and simple to install permanent formwork system. Each Cellform HX panel is supplied to the required beam width and depth, allowing them to be quickly installed with the range of accessories ...
Cellform HX System Cordek
Cellvent HX combines the benefits of the Cellcore HX range with Ventform to alleviate the effects of ground heave whilst also providing an excellent gas venting medium. It is designed for use under suitably reinforced ground floor slabs where subsidence is not...
Cellvent HX Cordek
Groundform is a permanent formwork system used for applications including pile cap and ground beam construction. Manufactured from a robust polypropylene material, it is suitable for supporting a maximum depth of 1.2m of concrete required for ground beams and ...
Ground Form Cordek
Corgrid permanent formwork panels consists of a steel mesh, fully encapsulated in heat shrunk polythene, supplied pre-formed in a U-shape or L-shape profile, or as flat sheet as required. Lightweight and easy to handle, Corgrid has been engineered to ensure qu...
Corgrid - Ground Beams Cordek
Sideform is a permanent formwork product used for forming in-situ ground beams. Based upon the Cordek Groundform system, it is supplied in a range of standard sheet sizes to be cut on site or alternatively manufactured to suit a specific depth of ground beam. ...
Side Form - Ground Beams Cordek
Gripper and Tric-trac spacers are designed to support the steel reinforcement used within reinforced concrete structures. The spacers remain in-situ throughout the construction process allowing the reinforcement to become encased in concrete. When installed co...
Reinforcement Spacers Cordek
Sacrificial Guide Wall Formers are used to accurately form an in-situ concrete guide wall which is critical in the positioning and alignment of piles in a contiguous or secant piled wall. From a customerÕs pile layout plan Cordek will produce a drawing detail...
Sacrificial Guide Wall Formers Cordek
Cordek Sheet Pile Infills are designed as a quick, economical and lightweight solution to infilling the open pans in an exposed sheet pile wall. Manufactured to order from Filcor EPS (Expanded Polystyrene), they are available in a range of profiles and densiti...
Sheet Pile Infills Cordek
The Pilecor system is designed to simplify the process of forming a structural connection between a bored pile and a basement slab construction. Pilecor is manufactured from high density Filcor EPS (Expanded Polystyrene) and is cut using CNC hot wire cutting e...
Pilecor - Piling Cordek
Filcor EPS (Expanded Polystyrene) is increasingly being specified for an ever-growing range of applications. The most common applications include use as a lightweight structural fill alternative to more traditional fill materials....
Filcor EPS Cordek
Trough Moulds are a reusable formwork system for constructing one-way spanning ribbed concrete floors, which can achieve greater spans and use less concrete when compared to traditional flat slabs. Traditionally manufactured from Filcor EPS (Expanded Polystyre...
Trough Moulds Cordek
Gas Resistant DPC (Damp Proof Course) is a polymeric DPC, designed for use in applications where combined damp proofing and gas protection is required. The DPC is robust and flexible, performing well under high compressive loads....
Gas Resistant DPC Cordek
Puraflex DPC (Damp Proof Course) is a high performance, hydrocarbon and chemical resistant barrier with exceptional resistance to a wide range of pollutants including hydrocarbons, industrial chemicals, toxic waste, natural and radioactive gases. ...
Puraflex DPC Cordek
Radon Membrane is a high performance gas membrane, for use in applications where resistance to radon gas is required as part of either a ÔfullÕ or ÔbasicÕ radon protection system. The membrane is generally used within construction applications, predominant...
Radon Membrane Cordek
Air Bricks combined with adjustable cavity vents are designed to provide a practical method of venting ground gases from beneath a building through the perimeter wall construction. The air bricks can be connected to one of the Cordek venting systems, which whe...
Air Bricks and Cavity Vents Cordek

Cordek reviews

Write your review


(ctrl/cmd + return) to send