Plumbing Fittings

    700+ Products

    Foul V3 Sump Pump

    Delta Membrane Systems Limited
    A packaged pump station designed to collect foul water from basements and ground floor extensions where other facilities in the property discharge via gravity. A typical application would be the collection and discharge of foul water from a basement fitted wit...

    3 specifiers have shown an interest in this product the last month.

    e-NSC - Water Pumps

    Lowara UK
    By combining high efficiency with high flexibility regarding installation, material options and temperature, the new Lowara e-NSC series is the natural choice for water transport, hydronic heating and chiller systems, fire protection systems and a vast number ...

    3 specifiers have shown an interest in this product the last month.

    Ball valves for Gas Distribution

    Broen Valves Ltd
    The solutions adopted by BROEN in their gas distribution ball valves enable 100% tightness and safety. The advanced systems, e.g. FireSafe, the stem sealing and DBB (Double Block and Bleed) meet the stringest requirements of our customers. We also equip our b...

    Bray: Double Flanged Resilient Seated Butterfly Valve, Series 3A/3AH

    Bray Controls (UK) Ltd
    Bray's Series 3A/3AH resilient seated butterfly valve is a Double Flanged design which can be used for dead-end service. A major design advantage of Bray valve product lines is international compatibility. The same valve is compatible with most world flange st...

    5 specifiers have shown an interest in this product the last month.

    Series 32/33 & 35/36 Resilient Seated Butterfly Valve

    Bray Controls (UK) Ltd
    This butterfly valve series has many of the design features and benefits of the smaller Bray valves, such as high Cv ratings, minimum parts exposed to the line media, greater reliability and a proven record of long service life. [A] BLOW-OUT PROOF STEM: A re...

    1 specifier has shown an interest in this product the last month.

    Series 30/31 Resilient Seated Butterfly Valve

    Bray Controls (UK) Ltd
    The series 30/31 resilient seated butterfly valve's high strength through-stem design allows easy disassembly and reduced disc to stem failure. [A] STEM RETAINING ASSEMBLY: The stem is retained in the body by means of a unique Stainless Steel Spirolox® r...

    2 specifiers have shown an interest in this product the last month.

    The Professional, 3 Way (Tri-Flow) Tap

    Fountain Softeners
    The Coriandoli Professional 3-Way (Tri-Flow) kitchen tap has a detachable shower mixer spout (for hot and cold) and a separate horizontal, revolving spout for filtered drinking water. The detachable spout will ensure water can reach all the areas a normal ...

    9 specifiers have shown an interest in this product the last month.

    ALT12 - Water-Supply Pipe Protection

    Edwards Standpipes
    Manufactured in galvanised mild steel, the Edwards Allotment Standpipe offers the advantage of dual outlet taps, making it ideal for areas that require multiple watering points such as garden allotments, cemeteries and other municipal areas. The units are man...

    2 specifiers have shown an interest in this product the last month.

    504 Gate Valve

    Hattersley
    Gate Valves - Cast Iron. Ductile iron with integral flanges. Outside screw pattern with rising stem. Ideal for use on more active media where fluid might have an adverse affect on thread. Flanged ends require no pipe threading....

    5 specifiers have shown an interest in this product the last month.

    MH733 Double Regulating Valve

    Hattersley
    The double regulating feature allows the valve to be used for isolation and to be re-opened to its ore-set position to maintain required flow rate...

    3 specifiers have shown an interest in this product the last month.

    Did you know that the Length for products within the Plumbing Fittings category, can range from 12 mm to 18000 mm and the average is 264 mm?

    ELGEF Plus ball valve "full bore"

    George Fischer Sales Ltd
    The line of ELGEF Plus ball valves from GF Piping Systems has been specially designed for use in underground gas and water distribution piping systems. The ball valve is made entirely of plastic and is therefore resistant to corrosion. Thanks to the homogenou...

    ELGEF Plus ball valve

    George Fischer Sales Ltd
    The line of ELGEF Plus ball valves from GF Piping Systems has been specially designed for use in underground gas and water distribution piping systems. The ball valve is made entirely of plastic and is therefore resistant to corrosion. Thanks to the homogenou...

    DM931 Double Regulating Valve

    Crane Fluid Systems
    Primarily used in injection or other circuits requiring a double regulating valve for systems balancing. Accuracy of flow measurement is ±5% at the full open position of the valve. Some reduction in accuracy occurs at partial openings of the valve....

    5 specifiers have shown an interest in this product the last month.

    DPAR951 Differential Pressure Control Valve

    Crane Fluid Systems
    Extremely Efficient, the DPCV is set to a maximum differential pressure limit, under dynamic balancing conditions, which ensures flow cannot exceed a desired rate. It therefore helps reduce energy consumption, the risk of noise and simplifies the commissioning...

    3 specifiers have shown an interest in this product the last month.

    107HU Ball Valve

    Hattersley
    Ball Valve with Male Union. Dezincification resistant copper alloy ball valve. PTFE seats and seals. Blow- out proof stem. Fitted with hose union and captive cap. Lockshield operation....

    Ball valve type 375 PVC-UWith solvent cement sockets metric

    George Fischer Sales Ltd
    Model: For easy installation and removal Ball seals PTFE Actuator unit not connectable Threaded valve ends are only enclosed for DN10/15-50 z-dimension, valve end andunion nut are not compatible with type 546 Range of use: Basic applications of the water treat...

    7 specifiers have shown an interest in this product the last month.

    D151 Gate Valve

    Crane Fluid Systems
    Crane gate valves offer the ultimate in dependable service wherever minimum pressure drop is important. The D151 carries the British Standards Institution kitemark - your assurance of exacting quality standards. In addition the D151 is WRAS approved....

    3 specifiers have shown an interest in this product the last month.

    950 Butterfly Valve

    Hattersley
    Semi-Lugged Wafer Pattern Butterfly Valve. Ductile Iron Body. Aluminum Bronze Disc. Liner bonded to steel backing ring. High strength, low friction bearings form upper and lower shafts, to restrain shaft deflection and ensure effective stem sealing....

    1 specifier has shown an interest in this product the last month.

    Series 31H Resilient Seated Butterfly Valve

    Bray Controls (UK) Ltd
    Series 31H Lug resilient seated butterfly valves are drilled and tapped to meet ASME Class 125/150 and PN16 flanges. Series 31H Valves will not be automated....

    2 specifiers have shown an interest in this product the last month.

    M653 Check Valve

    Hattersley
    Cast Iron with Lever and Weight...

    2 specifiers have shown an interest in this product the last month.

    Did you know that the most common Material(s) for products within the Plumbing Fittings category are Brass , Bronze and Stainless Steel?'

    M552 Gate Valve

    Hattersley
    Cast iron with integral flanges. Outside screw pattern with rising stem. Idea for use on more active media where fluid might have an adverse affect on thread. Flanges ends require no pipe threading....
    Load More Products

    Plumbing Fittings Building Products

    Plumbing Fittings include everything you need to kit a building out to be fully functional in terms of water flow– think taps, valves, water control and measurement solutions, water pressure boosters, water pumps, water-supply pipe protection products, and water-supply pipes.
    Products in this category have applications in commercial, industrial, and residential properties and structures.
    Using SpecifiedBy, you can search the biggest range of products in the UK, allowing you to source and compare the best Plumbing Fittings solutions for your project, from the industry’s leading suppliers, such as Crane Fluid Systems, Delta Membrane Systems, Durapipe UK, GRM Insulation Systems, Wavin, Zoeller, Triton Systems, Grohe, and Green Building Store.
    Search and compare check valves, ball valves, double regulating valves, balancing valves, phenolic pipe supports, butterfly valves, water sensing cables, grinder pumps, sink mixers, strainers, radiator valves, water savers, and much, much more.