Find, compare and price building products without wasting time on visiting, registering, & navigating multiple manufacturer websites, downloading countless technical documents for comparison, or waiting days for quotes.
Built to get you results quickly.
Products & information updated daily.
All the information you need in one place.
The largest product database in the UK.
A highly advanced floor primer designed to stabilise and prepare substrates for the application of adhesives and levelling compounds. We recommend using Level X Primer in conjunction with the Level X Self-levelling Compound for a strong and reliable result.
Level-X is designed to increase adhesion, durability, water resistance and strength.
P R E PARAT I O N :
Surfaces must be sound and free from contaminants. Any laitance or surface treatments must be removed before use. Concrete, anhydrite screeds and power floated concrete must be fully cured and any dust removed by vacuum. The temperature of the substrate must be above 5ºC when Level-X Primer is applied. Underfloor heating must be switched off 2 days before application. In some cases, a damp proof membrane may also be required.
A P P L I CAT I O N :
Shake well before use. Apply evenly to the whole surface with a paint roller or brush. Please note that the coverage will be less with a roller. Wash tools after use with warm water. Allow approximately 1 hour in good conditions to fully dry. Avoid excessive traffic immediately after drying.
ANHYDRITE SCREED: Apply one coat diluted 3 parts water to 1 part primer and allow to dry. Follow with a second undiluted/neat coat.
CONCRETE, SAND AND CEMENT SCREEDS, BRICK, BLOCK, CEMENT BOARDS, PLASTER, DRY LINING: Apply one coat diluted 3 parts water to 1 part primer. NB: Plaster will require a second undiluted coat, if a cement-based product is being applied.
TIMBER, PLYWOOD, UNDERFLOOR HEATING, FIBREGLASS: Apply undiluted primer to all exposed edges and joints and allow to dry. Apply one coat diluted 2 parts water to 1 part primer.
QUARRY TILES, TERRAZZO, NATURAL STONES: Apply one coat diluted 3 parts water to 1 part primer.
CERAMICS, VINYL, ASPHALT, BITUMEN: Apply one coat diluted 1 part water to 1 part primer mixed with a little neat cement to form a slurry.
STEEL: Abrade the surface and apply one coat diluted 1 part water to 1 part primer.
1 litre neat Level-X Primer = 10 square metres.
STORAG E :
Store unopened in dry conditions. Protect from frost.
|Materials & Finishes|
|Drying time (?)||45 minutes|
|Material (?)||Water based styrene-butadiene polymer|
|Max Application Temperature (?)||35 °C|
|Min Application Temperature (?)||5 °C|
© SpecifiedBy 2019. All rights reserved.