Broadsword

Slim depth sheet Steel construction with no visible joints on the front face of the luminaire
Simple Geometric form
Twin adjustable Wire suspension kit with 1.5m maximum drop (supplied separately). One suspension kit per luminaire and one for every infill 900mm and above or if ending a continuous run on an infill
Standalone or continuous configuration
For continuous mounting infills must be used (supplied separately)
Standalone luminaire does not require end caps
Continuous luminaire requires end cap kit (supplied separately)
Infills available in 300 / 600 / 900 / 1200 / 1500mm
Two integral emergency options available; 3hr emergency or COMEPS (can be wired as Easytest if required)
IP20
RAL Colour: Silver RAL9006 or White RAL9003
Integral controls options available:


COM4 – Command 4 switching or dimming PIR detector with photocell for use with standalone luminaires
COMD1 – Command Elite DALI addressable PIR detector with photocell for use with continuous or standalone luminaires
COM4 – Command 4 switching or dimming PIR detector with photocell for use with standalone luminaires
COMD1 – Command Elite DALI addressable PIR detector with photocell for use with continuous or standalone luminaires