Isorubber Base - Acoustic Isolation and Vibration Reduction Mat

Isorubber Base is an acoustic and vibration reduction mat for use in separating floor constructions to provide sound proofing and noise reduction.

Isorubber Base is an acoustic isolation and vibration reduction mat. It is primarily used in concrete and timber floor systems to achieve Approved Document Part E compliance, but can also be used in general sound proofing and noise reduction applications. It is also the main acoustic component of the Robust Detail E-FC-4 and E-FC-14 constructions.

Isorubber Base is a 6mm thick acoustic insulation and vibration reducing mat that can be laid beneath a screed or timber floating floor to reduce impact sound and vibration transmission to assist in sound proofing applications. A very durable product with a density of approximately 635Kg/m3, Isorubber Base does not suffer from any deterioration of acoustic performance during the normal lifespan of a building. This is because it undergoes virtually no short term deformation or long term creep deformation under normal domestic loads.

With a recycled content in excess of 90% waste rubber, a Global Warming Potential of Zero and an Ozone Depletion Potential of Zero Isorubber Base provides a means of using problematic waste material to the benefit of the environment.

Product Benefits:

• Continues to perform for the life of the building.
• Suitable for use with under floor heating.
• Simple installation.
• Over 90% recycled content.
• Over 4 million m2 installed in the UK.