Alitherm 55

This specification defines materials, construction finish and hardware for the “Alitherm” 55 Polyamide casement window, which conforms generally with BS 4873 specification for aluminium alloy windows. Windows described in this specification are suitable for both the replacement windows into the existing building and installation into new building work.


Materials:
Aluminium: AlMgSi 0.5 Type 6060/6063 T5 in condition F22 (according to NBN P21-001 and DIN 1725)
Sealings: E.P.D.M. according to DIN 7863, TV 110, NFP 85301, ISO 3994. Tested and approved according to an artificial ageing test of “Plexi glass” combined with vulcanised rubber.
Co-extruded profiles: according to DIN 7863, TV 110, BFP 85301, ISO 3994, tested and approved according to an artificial ageing test of “Plexi glass” combined with vulcanised rubber.
Thermal break: polyamide strips PA 6.6.25% reinforced with glass fibre.
Radiation barrier: polyamide strips PA 6.6.25% reinforced with glass fibre.


Finishing:
Electrostatic Powder coating: according to the guidelines of A..P.A.-Qualicoat in most of the current RAL-colours.
The composed profiles (with thermal break) can be coated with different inner and outer colours (Single colour).
Anodisation in satin or bronze colours with EWAA/EURAS-Qualinod quality label.
Glass shall conform to the requirements of BS 6262 and part N of the Building Regulations for Thickness and Type.
Profiles and Gaskets will accommodate double glazed units of thickness 28mm


Construction:
Frame members are mitre cut at 45 degrees and faces coated with a suitable gap sealer using internal extruded aluminium corner cleats together with a gluing compound.
Members are abutted and securely jointed by mechanical or crimped means.
Transoms and mullions are end milled to shape and mechanically secured to frame members by means of self tapping Screws driven in screw receptacles in the profile or by means of internal cleats.
All mechanical joints shall be sealed against entry of water.
All fixings used in construction shall be either Stainless Steel, aluminium alloy or other suitable corrosion resistant materials.