webertec EP pourable grout - Precision Grouting

High-strength, chemically-resistant grout.

webertec EP pourable grout is specially formulated from epoxy resin and graded aggregates producing materials with exceptional toughness, chemical resistance, good flow characteristics and negligible shrinkage.

A three-component pack which makes up into one mix.


About this product
webertec EP pourable grout finds a wide application in the grouting-in of:

Bearings
Starter bars
Dowels
Balustrading
Crane rails
Machine baseplates
Setting-in bolts
Fixing runway lights
Situations where tight clearances add to the difficulties of obtaining secure fixings.


Features and benefits
Complies with BS EN 1504-3 and -6
Capable of withstanding high dynamic loads
High compressive and tensile strength (view Technical Datasheet for more information)
Very good chemical resistance
Cure within the temperature range 5°C to 35°C
Negligible shrinkage factor allows use for underplate or rail grouting.
Grout remains in contact with the underside
Can be placed in much thinner sections than cementitious grouts resulting in cost savings.


Things to consider
Fresh grout that has not yet set can be removed with webertec solvent using a cloth or brush to clean tools and spillages.
Set grout has to be removed with methylene chloride paint stripper and care must be taken during its use
The shelf life of webertec EP pourable grout is in excess of 12 months if stored in cool, dry, frost-free conditions