Reno Roof

RENO ROOF is an extremely tough durable penetrating waterproof sealer containing fungicide that will penetrate deep into the tile. Two coats are applied to build up the resistance not only to the weather but future growth of algae etc. RENO ROOF protects and revitalises tired and drab looking roofs to enhance any building.
RENO ROOF is ideal for slate, tiles, Sand faced tiles, concrete tiles and concrete roofs.
RENO ROOF is manufactured at our own factory to an exact specification and quality control. The formulation is based
on 3 extremely durable Synthetic Resins blended with polybutene for flexibility. It contains fungicide and special
colour components for excellent colour retention, weatherproofing protection and durability.
RENO ROOF may be applied to a dry surface at any temperature using a roller, brush or airless spray equipment. The
addition of solvent is permitted to adjust for any change in viscosity due to low temperatures.
Depending on the porosity and profile of the surfaces coverage is, for 2 coats up to 3 sqm / litre.
Supplied in 20ltr UN resealable metal drums.
Surface dry in 1 - 3 hours. Fully cured in 7 days.
FOR PERIOD PROPERTY TILES WE RECOMMEND RENO DRY 2R OR RENO PROOF CLEAR - RING FOR ADVICE.
Download Material Safety Datasheet for Reno Roof
Tile Red
Burnt Terracotta
Chestnut
Green
Slate Grey
This roof has not had any attention since being laid 16 years ago. The damp, porous surface of this roof is a perfect environment to promote the growth of algae etc, once it has taken hold it will continue to spread, algae and dirt stop the flow of water from the roof soaking up water therefore generating surface erosion.
Showing moss and years of built up dirt
Roof coated with 2 coats of RENO ROOF in chestnut
Fully restored roof fully protected whatever the weather. Colour: Slate Grey
RENO ROOF complies with British Standards for weatherproofing and waterproofing roofs as the examples show.
Typical goxhill tile 30 years old, attacked by acid rain, algae etc - started its life as a red tile.
Power washing of tile shows erosion of surface and complete loss of original surface and colour. Except for
the overhang at the top of the tile.
Half of tile coated in RENO ROOF tile red.
Water poured on to the tile.
The untreated left hand side absorbs water.
The RENO ROOF treated side repels water.
Further proof - 2 examples of the superior water and weatherproofing qualities.
before cleaning
On the left: Clear RENO ROOF to give the original look. On the right: RENO ROOF tile red.
Water poured on the tile
Results show the effectiveness of the RENO ROOF products.
Weather resistant.
Will not chip, flake or peel.
Built in fungicide.
Excellent colour retention.
Tough and flexible.
Excellent adhesion.
Ideal for period property restoration.