Nulite can supply a simple 230 Volt system that allows power to acutate the vent when it is too hot or too cold with a switch or remote control that gives partially or fully opening, please contact our technical department for specific requirements.
Option (1) - ACK 42 - 230V Actuator & Switch, (without) integral reciever, Stroke length adjustable 100 to 400mm.
The ACK 42 has been specifically designed for use with heavy vents & windows, with a maximum load of 300N per actuator. The ACK has a rounded design, stainless steel double link chain and a manually adjustable stroke length form 100 - 400mm. This unit operates with a ventilator switch, wiring diagram provided.
Option (2) - ACI22/25 230V Actuator & Switch, (without) integral reciver, available in stroke sizes of 150mm & 250mm
The ACI22 Actuator, is a high quality slim line actuator for use with windows and roof vents, with a maximum load of 200N. The ACI incorporates a corrosion resistant steel chain & electronic safety cut off in the closed direction, for safety & ease of installation. This unit operates with a ventilation switch, all wiring diagrams provided.
Option (3) - ACI22/25 - RC Remote set. 230V, (with) integral receiver, standard stroke available 150mm or 250mm.
This option includes 1no RC10 - 2 Transmitter with an option for 1no Remote thermostat, 1no Rain sensor. The ACI22-RC has the same specification as the standard ACI actuator, but in addition has a inbuilt radio receiver, and is operated via a hand held remote. The unit has also been designed for ease of installation and can be directly plugged into a standard 230V domestic power point. In addition to the standard ACI22 a remote thermostat and rain sensor can be connected directly to the ACI/22-RC. The option is available for a similar system using a 24V actuator.
Option (4) - Comfort line automatic control & ACK 42 230V actuator(without) integral receiver.
This system includes: 1no Comfort-line control system (including) 1no remote thermostat, 1no rain sensor, 1no Comfort line remote transmitter. Combining the ACK42 230V actuator, and the comfort-line climate control system. will give you a stylish wall mounted control panel with LCD display and a range of functions for manual day to day control to fully automatic and remote options.
Please note that these product properties are not a replacement for the manufacturer's literature and it is always recommended that NuLite is consulted before specifying.
|
|
||
| Uniclass (?) | Pr_75_50_02 Actuators | |