HydroBond 109-LM
by Newton Waterproofing Systems
Radon-certified, flexible, single-component, cold-applied and seamless rubber waterproofing membrane used primarily for the external waterproofing of earth-retaining structures such as basements and foundation walls.
HydroBond 109-LM is extremely puncture resistant with elasticity of 850% and a 95% recovery memory. The membrane becomes fully engaged into the substrate to prevent water tracking and is suitable for all below ground and earth-retained structures, ranging from domestic basements to the largest civil engineering projects.
HydroBond 109-LM is available in two variants: Medium Viscosity, for use in warmer temperatures, and Low Viscosity, for when it is cooler, HydroBond 109-LM is also a constituent product of the new Newton HydroBond System supported by BDA Agrement Certificate BAB 16-031/04/A and is accepted by the NHBC as a suitable waterproofing system for Type A Waterproofing to Grades 1a, 1b, 2 & 3 - BS 8102:2022.
Key Benefits
- Fully-bonded seamless membrane.
- Good elasticity with no shrinkage.
- Medium / Low Viscosity variants instantly raintight when sprayed with HydroBond 109-LM Catalyst.
- Primer not required for most substrates.
- Complete vapour barrier.
- Solvent free, non-toxic and odourless.
- Non-flammable - No VOCs.
- High radon gas resistance.
Specification Details for HydroBond 109-LM (Mortars)
Please note that these product properties are not a replacement for the manufacturer's literature and it is always recommended that Newton Waterproofing Systems is consulted before specifying.
Technical
|
||
| Adhesion to concrete (?) | 0.62 N/mm2 | |
| Specific Gravity (?) | 1.1 g cm-³ | |
| Tensile Adhesion (?) | 0.58 N/mm2 | |
| Water Tightness (?) | 7 Pa | 100% |
| Water Vapour Resistance SD (?) | 72.4 m | |
Certifications & Ratings
|
||
| Reaction to Fire (?) | B2 | |
Materials & Finishes
|
||
| Colour (?) | Black | |
Other
|
||
| Uniclass (?) | Pr_20_31_53 Mortars and grouts | |
File Downloads for HydroBond 109-LM
Contact
Contact
Contact
