Aqua-Mat 100T Underfloor Heating
by Impey Showers
A strong self-adhesive all-in-one heating mat which ensures a quick and easy installation directly on the existing floor. It can be covered with a self-levelling floor screed onto which the top floor can be laid in the usual way.
The system consists of a thin 4 mm thick twin conductor electric heating cable attached to an open weave fibre glass mesh, with self-adhesive on the entire surface of the mat.
Features and benefits:
- Easy to install.
- Low installation height.
- Long life-time.
- 100% screened.
- 12-year warranty.
- Compliant with IEC60335-2-96.
- Applications:
- The low installation height is especially suited to renovations.
Specification Details for Aqua-Mat 100T Underfloor Heating (Underfloor Heating)
Please note that these product properties are not a replacement for the manufacturer's literature and it is always recommended that Impey Showers is consulted before specifying.
Technical
|
||
| Ambient Temperature (?) | 65 °C | |
| Effect (at 230 V) (?) | 50 W | |
| Horizontal Resistance (?) | 1058 Ohm | |
| IP Rating (?) | IP X7 | |
| Max UFH Heat Output (?) | 100 W/m² | |
| Minimum Installation Temperature (?) | -5 °C | |
| Pulling Strength (?) | 120 N | |
| Voltage AC (?) | 220 - 240 VAC | |
Physical Properties
|
||
| Construction (?) | One cold lead , Round , Twin conductor with screen | |
| Deformation Strength (?) | 600 N | |
Size & Weight
Commercial
|
||
| Product ID Number (?) | 83030500 | |
| Typical Building Zone (?) | Wetrooms | |
| Warranty (?) | 12 years | 90.91% |
Materials & Finishes
|
||
| Cold Lead Spec (?) | 2 x 1.0 mm2,4 m DTWB,Earthed | |
| Material (?) | Alu-foil , FEP , Lead , PVC , Tinned copper | |
Other
|
||
| Uniclass (?) | Ss_60_40_92 Underfloor heating and cooling systems | |
File Downloads for Aqua-Mat 100T Underfloor Heating
Contact
Contact
Contact
