Cemflow Topping - Industrial grade floor topping

Cemflow Topping is designed as an industrial grade floor topping for upgrading and renovating new and existing internal floors. Cemflow Topping is supplied as a pre-blended dry powder designed for application between 5 mm to 15 mm (in one application) to provide a finished industrial floor.

Cemflow Topping is self-smoothing, dimensionally stable, and fast drying. It is suitable for use in a wide range of industrial environments such as warehouses, food processing plants etc. subjected to medium to heavy traffic. Cemflow Topping is suitable for application on to a wide range of subfloor types, including; sand and cement screeds, concrete, terazzo, granolithic, epoxy and polyurethane resins and waterproof membranes.

Typically Cemflow Topping can be pumped up to 1500 m² per day. Coverage of 600 m² can be achieved when hand applied, dependent upon manpower and equipment used.

We would recommend that Cemflow Topping be sealed in areas where water may come into direct contact with the cured material. Cemflow Topping may be sealed with Strongcoat WD water based epoxy coating, or if a matt finish is required, apply a first coat of clear Strongcoat WD followed by a coat of Strongcoat Matt Clear.

Cemflow Sealer can also be used to seal the product in a commercial environment. (Further information is available from our Technical Department or the Product Data Sheets).