Cemflow Light - Light duty floor topping

Cemflow Light is designed as a light duty floor topping for upgrading and renovating new and existing internal floors. Cemflow Light is supplied as a pre-blended dry powder designed for application between 3 mm to 6 mm or can be filled to 10 mm (in one application) to provide a finished floor for foot traffic.

Cemflow Light is self-smoothing, dimensionally stable, and fast drying. It is suitable for use in a wide range of applications. It is also protein free so may be used in biologically sensitive areas.
Cemflow Light is suitable for application on to a wide range of subfloor types, including; sand and cement screeds, concrete, terazzo, granolithic, epoxy and polyurethane resins and waterproof membranes.

We would recommend that Cemflow Light be sealed in areas where water may come into direct contact with the cured material. Cemflow Light may be sealed with Strongcoat WD water based epoxy coating, or if a matt finish is required, apply a first coat of clear Strongcoat WD followed by a coat of Strongcoat Matt Clear.

Cemflow Sealer can also be used to seal the product in a commercial environment. (Further information is available from our Technical Department)